spessasynth_core documentation
    Preparing search index...

    Interface GSDelayParameter

    GS-compatible delay parameters.

    Also see GSDelayProcessor to see how to implement a custom GS-compatible delay processor.

    interface GSDelayParameter {
        feedback: number;
        level: number;
        levelCenter: number;
        levelLeft: number;
        levelRight: number;
        preLowpass: number;
        sendLevelToReverb: number;
        timeCenter: number;
        timeRatioLeft: number;
        timeRatioRight: number;
    }

    Hierarchy (View Summary)

    Index
    feedback level levelCenter levelLeft levelRight preLowpass sendLevelToReverb timeCenter timeRatioLeft timeRatioRight
    feedback: number

    0-127 (-64)-63 This parameter affects the number of times the delay will repeat. With a value of 0, the delay will not repeat. With higher values there will be more repeats. With negative (-) values, the center delay will be fed back with inverted phase. Negative values are effective with short delay times.

    level: number

    0-127 This parameter sets the amount of the effect sent to the effect output.

    levelCenter: number

    0-127 This parameter sets the volume of the central delay. Higher values result in a louder center delay.

    levelLeft: number

    0-127 This parameter sets the volume of the left delay. Higher values result in a louder left delay.

    levelRight: number

    0-127 This parameter sets the volume of the right delay. Higher values result in a louder right delay.

    preLowpass: number

    0-7 A low-pass filter can be applied to the sound coming into the effect to cut the high frequency range. Higher values will cut more of the high frequencies, resulting in a more mellow effect sound.

    sendLevelToReverb: number

    0-127 This parameter sets the amount of delay sound that is sent to the reverb. Higher values result in more sound being sent.

    timeCenter: number

    0-115 0.1ms-340ms-1000ms The delay effect has three delay times; center, left and right (when listening in stereo). Delay Time Center sets the delay time of the delay located at the center. Refer to SC-8850 Owner's Manual p. 236 for the exact mapping of the values.

    timeRatioLeft: number

    0-120 4% - 500% This parameter sets the delay time of the delay located at the left as a percentage of the Delay Time Center (up to a max. of 1.0 s). The resolution is 100/24(%).

    timeRatioRight: number

    1-120 4%-500% This parameter sets the delay time of the delay located at the right as a percentage of the Delay Time Center (up to a max. of 1.0 s). The resolution is 100/24(%).

    Settings
    Member Visibility

    On This Page
    Properties