0-127 (-64)-63 This parameter affects the number of times the delay will repeat. With a value of 0, the delay will not repeat. With higher values there will be more repeats. With negative (-) values, the center delay will be fed back with inverted phase. Negative values are effective with short delay times.
0-127 This parameter sets the amount of the effect sent to the effect output.
0-127 This parameter sets the volume of the central delay. Higher values result in a louder center delay.
0-127 This parameter sets the volume of the left delay. Higher values result in a louder left delay.
0-127 This parameter sets the volume of the right delay. Higher values result in a louder right delay.
0-7 A low-pass filter can be applied to the sound coming into the effect to cut the high frequency range. Higher values will cut more of the high frequencies, resulting in a more mellow effect sound.
0-127 This parameter sets the amount of delay sound that is sent to the reverb. Higher values result in more sound being sent.
0-115 0.1ms-340ms-1000ms The delay effect has three delay times; center, left and right (when listening in stereo). Delay Time Center sets the delay time of the delay located at the center. Refer to SC-8850 Owner's Manual p. 236 for the exact mapping of the values.
0-120 4% - 500% This parameter sets the delay time of the delay located at the left as a percentage of the Delay Time Center (up to a max. of 1.0 s). The resolution is 100/24(%).
1-120 4%-500% This parameter sets the delay time of the delay located at the right as a percentage of the Delay Time Center (up to a max. of 1.0 s). The resolution is 100/24(%).
Restores this effect processor instance from a snapshot.
The snapshot to restore.
Gets a snapshot of this effect processor instance.
Process the effect and adds it to the output.
The input buffer to process. It always starts at index 0.
The left output buffer.
The right output buffer.
The mono input for reverb. It always starts at index 0.
The index to start mixing at into the output buffers.
The amount of samples to mix. This will never be larger than SynthProcessorOptions.maxBufferSize of the parent SpessaSynthProcessor instance.
Delay creates echoes. It is also possible to give depth and width to a sound by adding a short delay to the original sound.
This is a Roland GS-compatible delay interface.
It is used when GlobalMIDIParameter.system is
gmgm2orgs.SpessaSynthProcessor allows you to supply a custom delay processor. A custom delay processor must implement this interface.
Editing the parameters
Editing the parameters can be done via GS/GM2 system exclusive messages.